Table Of Contents

Toilet Installation Costs

By adding a toilet in your laundry room, you can create a more functional area. In rare circumstances, there may be enough room to add a shower and a tub along with a toilet to turn your laundry room into a second bathroom or a bedroom's ensuite.

These innovative interior design ideas can help add value to your home while also being less expensive than building an expansion or adding another level to your home. Read on to uncover more about installing a toilet in an existing laundry room.

Renovation Of The Laundry Room

Designing and renovating the area is the first step in deciding how to install a toilet in the laundry room. Draw a floor layout for the room, noting where the sink, toilet, shower, or tub will go. Make a plan for your cabinet and storage space as well. Will you like to utilise a standard towel rack or a huge vanity with drawers and cabinet space behind your sink, or do you want to add only an extra toilet?

After you've decided on the plan, look in your laundry, and look for fixtures that will work with your space's aesthetics. To make the necessary changes, seek assistance from your plumber and electrician. After that, you can employ contractors to put your unique fixtures in place.

Toilets should be placed near existing drains to the septic pipe when planning to install them in your laundry room. The project will be easier and less expensive if you only need to add a small piece of pipe to the system. You'll also need to connect a supply line to the toilet, but only a cold one, so it can flush and fill.

Before you start, a qualified plumber can help you figure out how to layout the pipes. We advise that you get your drain and vent lines installed first, then your supply lines. Adding more lighting to your new laundry bathroom could also be advantageous.

An overhead light near your toilet or shower and additional illumination above the sink or washing machine would be wholesome and add value to your home. You can install this with the assistance of your electrician. Most lights are not tricky to install if you have an existing junction box and are skilled with electrical work. However, switch off the power at the breaker before making any changes.

Toilet Installation Cost In Australia

Toilet installation is complicated by several elements that can influence the final cost. Installing a toilet in the laundry room of your new house or replacing an existing toilet takes a lot of thought and planning.

In Australia, the average toilet installation costs between $300 and $400. If you replace a toilet at a basic level, the price will be between $150 and $250. Purchasing a new toilet can cost upwards of $500, and a more luxurious toilet can cost even more. In addition, the final cost of the installation will be determined by the plumber's labour rates.

Here's a quick summary of what to comprehend before toilet plumbing:

  • The toilet's model, kind, and style will impact the installation and final expenditures.
  • Disposing of outdated toilets can be a time-consuming task.
  • The location of the extra toilet may impact how demanding the task is.
  • Any other unique requirements or challenges that the installation may entail will affect the price.

Impact Of Toilet Prices On The Overall Installation

When determining how the toilet will affect the overall cost of the installation, there are a few things to consider.

Toilet Type

The final installation cost will be determined by the toilet you choose. Understanding the differences between the two primary types of toilets is essential in deciding how the expenses will be affected.

Round toilet bowls

These toilets are better suited to smaller bathrooms and are less expensive in general. Furthermore, their height and design make them much more accessible for children to use.

Elongated toilet bowls

These toilets are more expensive because they are designed for adults and for larger bathrooms. On the other hand, these toilets are more attractive and come in various designs. They are also strong and comfy to sit on.

Toilet Efficiency

There will need to be considerations for toilet efficiency in addition to the type of toilet. This refers to how easily components in the toilet can be flushed away. Water-efficient appliances are labelled with the Water Efficiency Labelling and Standards (WELS) to assist in determining the toilet's efficiency. There are two primary types of flushing systems to consider when choosing a toilet.

Gravity flushing

These are more common, and the flushing technique is based on water weight. Furthermore, they are quieter and require less upkeep.

Pressure flushing

The flush propels water into the bowl using pressured air. It's perfect for clogs, although it's a little noisier and pricier. It will, however, be three times more powerful, although it will almost certainly require more frequent maintenance.

Dual flushing

In terms of how much water is used in the flush, these use full and partial flushing options. Simply put, when flushing the toilet, you will have the opportunity of either a complete or half-flush. This is the system that the majority of people will prefer.

Waterless flushing

As the name implies, no water is used in this type of toilet. These systems are designed for situations where plumbing is inadequate or non-existent, and there are choices for reclamation or composting. These will most likely be used as a last resort instead of dual-flush systems.

Additional Labour Costs

Multiple elements, including the plumber's work, will influence the total cost of the installation. A plumber will charge roughly $80 per hour to install the toilet on average. Additional fees may be added due to the process, such as replacing obsolete parts or resolving specific difficulties.

The following process is generally included in the toilet installation process:

  • Turning off the main water supply pipe.
  • Draining and removing the existing toilet from the place if necessary.
  • Replacing the existing wax ring.
  • Examining the present flange for any corrosion or issues.
  • Installing the new toilet and conducting tests to check that the entire plumbing system is in working order.

The following difficulties may have an impact on the final price:

  • Any system leaks arising from the system.
  • The flange is cracked and requires replacement or repairs.
  • The current wax ring is worn out and has to be replaced.
  • Existing caulking is inadequate or damaged, resulting in leaks.
  • The procedure of replacing a leaky flush valve is a failure, requiring more work.
  • A clogged drain is part of the job and needs attention.

The total installation cost may be influenced by the plumber's charges for existing plumbing. Extra work will be required if the lines or pipes need to be repaired or adjusted to accommodate the new toilet. Furthermore, if water has damaged the floor or the area around the toilet, the cost of repairs will rise. No additional work will be required if the toilet is the first to be installed in the space, such as in a new home.

Frequently Asked Questions

Can you put a toilet in a laundry room?

Provided the space is available, you could install a toilet in the laundry room. You could go even further by removing the rear exit door and replacing it with a single huge window for light and ventilation. To make the space larger, remove the wall between the existing toilet and the laundry.

What is the cost of adding a toilet to a laundry room?

The average cost of a laundry room bathroom ranges from $5,000 to $12,000, depending on the size and materials used.

Is it possible to have a toilet without plumbing?

When there is no main drainage pipe accessible, a Saniflo toilet is usually installed in a domestic residence. This means you can have a toilet wherever you want it without worrying about drainage. You can put a toilet beneath your stairs, make an ensuite bathroom, or even put a toilet in your basement.

What is the price of relocating a toilet?

A toilet or sink move might cost between $2,500 and $3,500 per fixture. When a bathroom's floor plan is changed, plumbing can be a significant cost element in a makeover. The most expensive thing to relocate is the toilet.

How far should the main drain be from a toilet?

If the toilet is less than 1.8 metres from the stack, connect the new toilet's waste line to the stack directly. The toilet can be three metres away from the stack if the waste line is ten cm.

Can you install a shower in place of a washing machine?

The smallest pipe used to drain a shower is three cm, and the largest pipe used for a shower is five cm. Most washing machine drainpipes are also five cm, so you can connect your shower and tub to the washing machine line as long as you follow the five cm regulation.

What are the requirements of a basement bathroom?

There must be enough of a fall in a basement bathroom to empty the toilet, sink, tub, or shower. Bathroom building will be pretty simple if your existing plumbing drain is deep enough to produce enough fall for drainage.

How is a Saniflo toilet different from a regular toilet?

A Saniflo toilet (additionally referred to as a macerator toilet) varies from a regular toilet in a few ways. One of the primary differences is that rather than flushing waste through the floor drainage system, a macerating toilet system flushes waste out of the toilet and into the general waste system using a centrifugal pump.

What are macerator toilets and how do they work?

An up flush toilet is known as a macerating toilet. It transports waste to a huge container behind the toilet or a container built into the wall. High-powered blades liquefy the waste before being pumped out of the machine through a conduit that is directly connected to the main drain line.

Does the washing machine drain into the sewer?

An electric pump transfers water from inside the cleaning drum, through a flexible drain line on the machine's underside, and out into your home sewer system, where it eventually makes its way out of the house.

How does a half bathroom contribute to the value of a home?

According to a National Association of Homebuilders study, adding a half bath to a typical home enhances its value by 10%. Adding a full bath can up the value of a home by up to 20%.

What is the cost of adding a half bath to a laundry room?

Expect to spend $5,000 to $15,000 if you're adding a half bath to an existing room or laundry. It will cost you $10,000 to $30,000 on average to expand space to make this happen. There is no shower or tub in a half bath, only a sink, and toilet.

Is it necessary to vent washer drains?

Venting is necessary for all plumbing equipment, including washing machines. Drains that are not properly ventilated can be slow and noisy and generate harmful pollutants. Drains that are appropriately vented allow the P-trap to keep sewer gases from entering your home.

Can you dispose of washing machine waste in the sink?

Using extended hoses and connecting them to the waste trap of your sink, you can easily install waste pipes for washing machines and dishwashers.

Where does the water from the washing machine go?

The water from washing machines is drained into a standpipe. A standpipe is a vertical section of pipe with an elbow on the bottom. The elbow stays full of water, preventing sewer gas from backing up into your laundry room.

What can you use as a washing machine drain?

You can also use a bathtub, shower, toilet, or sink drain if you can't find a central drain in the basement or the area where you'll install your washing machine. You'll only have to put in some effort to get those alternative drains to function with your washing machine.

Why does the toilet gurgle?

If your toilet gurgles when you wash your clothing, you can ensure that these two drain systems are linked. This type of configuration is not common. You might find the link between these two drain systems somewhere between the toilet and the dirt stack.

Professionally Install A Toilet In Your Laundry

Installing a toilet in the laundry is nothing crazy and can add even more value to your home. It is essential to ensure the proper drainage systems are in place so that you don't encounter problems when using the toilet in the laundry room. The best option is to get a professional bathroom designer or plumber to handle the installation for you.

North Perth, Perth, Western Australia - 0439 067 772
Get a Quote